Fujitsu Mini-Split Code 75
Soft lockoutShown as: OPERATION lamp blinks 7 times, TIMER lamp blinks 5 times, ECONOMY lamp blinking continuously
Suction gas thermistor error. The suction gas temperature sensor has shorted or gone open.
Manual wording: “Suction Gas Thermistor Error - Suction gas temperature thermistor has shorted or open detected.”
Documented for: RLF/RLF1 multi-zone systems on RLXFZ outdoor units
Likely causes, most common first
- Loose or erroneous molex plug connection
- Thermistor resistance out of specification
- Failed outdoor main PCB
What you can safely check yourself
- Turn the power off at the outdoor disconnect and breaker for about 5 minutes, then restore power
When to call a technician
The suction gas sensor is on refrigerant piping in the condenser. A technician must check and replace it.
A Fujitsu mini-split throwing this code repeatedly has a reason — clearing the code without fixing the cause just hides it.
Source
- 410A Mini-Split Troubleshooting Guide (Part # 6-26-FG2020 Rev. 5/2019) (Fujitsu General America, Inc., All R410A Halcyon mini-splits: RGLX, RL2/RLS3/RLS3H/RLS3Y/RLB/RLXB/RLXEH wall mounted, RLF/RLF1 multi-zone indoor units, RLXFZ multi-zone outdoor units, RML/RMLQ, RULX/RSLX universal-mount, RCLX cassettes) · checked 2026-08-25